*

Offline Пардисфла

  • Administrator
  • *****
  • Posts: 6085
  • Professional computer somebody
    • View Profile
OpenBSD 6.7
« on: May 24, 2020, 05:57:36 AM »
OpenBSD 6.7 was released this week. See the full release announcement for the (many, many) improvements made. Aside from the usual incremental progress, the main ones I'm interested in are the adoption of FFS2 as the default filesystem on most platforms, and extra hardware support, particularly for newer Intel Wi-Fi chips and the Pinebook Pro.

I decided to throw a fresh install of 6.7 on my Pine A64+ board. Here's the dmesg:

Code: [Select]
OpenBSD 6.7 (GENERIC.MP) #1: Sat May 16 15:59:24 MDT 2020
    root@syspatch-67-arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem  = 2015719424 (1922MB)
avail mem = 1923706880 (1834MB)
mainbus0 at root: Pine64+
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20200100
apm0 at mainbus0
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
"display-engine" at mainbus0 not configured
"osc24M_clk" at mainbus0 not configured
"osc32k_clk" at mainbus0 not configured
"internal-osc-clk" at mainbus0 not configured
"sound_spdif" at mainbus0 not configured
"spdif-out" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 24000 KHz
simplebus0 at mainbus0: "soc"
sxisyscon0 at simplebus0
sxisid0 at simplebus0
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 103 pins
ampintc0 at simplebus0 nirq 224, ncpu 4 ipi: 0, 1: "interrupt-controller"
sxirtc0 at simplebus0
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 13 pins
sxirsb0 at simplebus0
axppmic0 at sxirsb0 addr 0x3a3: AXP803
"de2" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
"usb" at simplebus0 not configured
"phy" at simplebus0 not configured
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at simplebus0: version 1.0
ehci1 at simplebus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at simplebus0: version 1.0
com0 at simplebus0sxiccmu_ccu_reset: 0x0000002e
: ns16550, no working fifo
com0: console
sxitwi0 at simplebus0
iic0 at sxitwi0
dwxe0 at simplebus0: address 69:69:69:69:69:69
rgephy0 at dwxe0 phy 1: RTL8169S/8110S/8211 PHY, rev. 5
"hdmi" at simplebus0 not configured
"hdmi-phy" at simplebus0 not configured
"interrupt-controller" at simplebus0 not configured
sxidog0 at simplebus0
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio1: 32 pins
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
"hdmi-connector" at mainbus0 not configured
"binman" at mainbus0 not configured
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SL16G, 0080> removable
sd0: 15193MB, 512 bytes/sector, 31116288 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd0a (d366cdda941f826a.a) swap on sd0b dump on sd0b
WARNING: bad clock chip time
WARNING: CHECK AND RESET THE DATE!
when you try to mock anyone while also running the flat earth society. Lol

*

Offline timterroo

  • *
  • Posts: 936
  • domo arigato gozaimashita
    • View Profile
Re: OpenBSD 6.7
« Reply #1 on: May 27, 2020, 08:46:53 PM »
OpenBSD 6.7 was released this week. See the full release announcement for the (many, many) improvements made. Aside from the usual incremental progress, the main ones I'm interested in are the adoption of FFS2 as the default filesystem on most platforms, and extra hardware support, particularly for newer Intel Wi-Fi chips and the Pinebook Pro.

I decided to throw a fresh install of 6.7 on my Pine A64+ board. Here's the dmesg:

Code: [Select]
OpenBSD 6.7 (GENERIC.MP) #1: Sat May 16 15:59:24 MDT 2020
    root@syspatch-67-arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem  = 2015719424 (1922MB)
avail mem = 1923706880 (1834MB)
mainbus0 at root: Pine64+
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20200100
apm0 at mainbus0
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
"display-engine" at mainbus0 not configured
"osc24M_clk" at mainbus0 not configured
"osc32k_clk" at mainbus0 not configured
"internal-osc-clk" at mainbus0 not configured
"sound_spdif" at mainbus0 not configured
"spdif-out" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 24000 KHz
simplebus0 at mainbus0: "soc"
sxisyscon0 at simplebus0
sxisid0 at simplebus0
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 103 pins
ampintc0 at simplebus0 nirq 224, ncpu 4 ipi: 0, 1: "interrupt-controller"
sxirtc0 at simplebus0
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 13 pins
sxirsb0 at simplebus0
axppmic0 at sxirsb0 addr 0x3a3: AXP803
"de2" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
"usb" at simplebus0 not configured
"phy" at simplebus0 not configured
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at simplebus0: version 1.0
ehci1 at simplebus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at simplebus0: version 1.0
com0 at simplebus0sxiccmu_ccu_reset: 0x0000002e
: ns16550, no working fifo
com0: console
sxitwi0 at simplebus0
iic0 at sxitwi0
dwxe0 at simplebus0: address 69:69:69:69:69:69
rgephy0 at dwxe0 phy 1: RTL8169S/8110S/8211 PHY, rev. 5
"hdmi" at simplebus0 not configured
"hdmi-phy" at simplebus0 not configured
"interrupt-controller" at simplebus0 not configured
sxidog0 at simplebus0
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio1: 32 pins
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
"hdmi-connector" at mainbus0 not configured
"binman" at mainbus0 not configured
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SL16G, 0080> removable
sd0: 15193MB, 512 bytes/sector, 31116288 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd0a (d366cdda941f826a.a) swap on sd0b dump on sd0b
WARNING: bad clock chip time
WARNING: CHECK AND RESET THE DATE!

What's your available mem AFTER boot?
"noche te ipsum"

"If you can't explain it simply, you don't understand it well enough."  - Albert Einstein